Can broken Valve Spring, Valve Spring Retainer and Valve Stem Oil Seal be replaced without removing the cylinder heads on Audi A4?

The replacement of broken valve springs and defective valve stem seals may be performed without the removal of the cylinder heads, and is commonly done with two special tools and a source of compressed air. Start with the valve cover, camshaft, the lifters and observe that in the 2.0L four-cylinder there is a requirement to have the cylinder head removed to get to the camshafts. Take off the spark plug of the cylinder which contains the defective part and in case you take off all the seals of the valve stems, take off all the spark plugs. Rotate the crankshaft until the piston in the given cylinder reaches Top Dead Center on the compression stroke one cylinder at a time in the firing order. Insert an air hose connector into the spark plug hole and hook it up to a pressurized air source forcing air into the valves to keep them in place. Insert stuff shop rags into the holes in the cylinder head to ensure that parts will not collect in the engine. Tap the top of each valve spring retainer to loosen the connection between the valve keeper and the spring retainer and carefully trim the spring to take the keepers out with the help of a valve spring compressor. Take away the valve spring and retainer, remembering that in case air pressure does not hold the valve down, the cylinder head might have to be taken off to fix it. Take off the old valve stem seals, taking note to differentiate between intake and exhaust seals. Tape or wrap a rubber band around the top of the valve stem to ensure that it does not fall into the combustion chamber and then release the air pressure. Check the valve stem damage and look at the eccentricity of the movement of the valve and binding in the guide, that can be the sign of bent valve or broken guide, in this case, the head of the valve has to be removed and then repaired. Use air pressure again to hold the valve in the closed position, and remove the tape or the rubber band. Coat the valve stem with engine oil and replace the valve guide seal using a new one and beating it in the slot. Fit the valve spring and retainer, squeeze the spring, and place the keepers on carefully and place a small dab of grease to hold them in. Lift the pressure of the spring tool and make sure that the keepers are in place. Turn off the air hose and take out the adapter of the spark plug hole and fit in the camshaft, lifters, timing belt, and valve cover. Lastly, screw the spark plug(s) into place and the ignition coil(s), change the engine on and listen to it, looking out of the valve cover region.

Genuine Audi Valve Spring Retainer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Valve Spring Retainers found

View related parts
Audi Valve Spring Retainers Part Number: 056-109-629-A
$11.20 MSRP: $17.51
You Save: $6.31 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate; Valve Retainer
Fits the following Audi Models:
- 100 | 1989-1994 | Base, CS, E, S | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
- 100 Quattro | 1989-1994 | Base, CS | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
- 200 | 1989-1991 | Base | 5 Cyl 2.2 L GAS
- 200 Quattro | 1989-1991 | 20v, 20v Avant, Avant, Base | 5 Cyl 2.2 L GAS
- 4000 | 1984-1987 | S | 4 Cyl 1.8 L GAS
- 4000 Quattro | 1984-1987 | CS, S | 5 Cyl 2.2 L GAS
- 5000 | 1984-1988 | CS, CS Turbo, S, S Turbo | 5 Cyl 2.2 L GAS, 5 Cyl 2.3 L GAS
- 5000 Quattro | 1986-1988 | CS, S | 5 Cyl 2.2 L GAS, 5 Cyl 2.3 L GAS
- 80 | 1988-1992 | Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS
- 80 Quattro | 1988-1992 | Base | 5 Cyl 2.3 L GAS
View More
View related parts
Audi Valve Spring Retainers Part Number: 06E-109-641-A
$23.86 MSRP: $38.18
You Save: $14.32 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate; Valve Spring Seats
Fits the following Audi Models:
- A3 | 2022-2023, 2015-2020, 2006-2013 | Base, Premium, Premium Plus, Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- A3 Quattro | 2022-2023, 2015-2020, 2009-2013 | Base, Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- A4 | 2005-2020 | Base, Cabriolet, Premium, Premium Plus, Prestige, Titanium | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
- A4 Quattro | 2005-2023 | Avant, Base, Cabriolet, Premium, Premium Plus, Prestige, Ultra sport | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.2 L GAS
- A4 allroad | 2017-2023 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- A5 | 2010-2014 | Cabriolet | 4 Cyl 2.0 L GAS
- A5 Quattro | 2008-2023 | Base, Cabriolet, Premium, Premium Plus, Prestige, Sport | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.2 L GAS
- A5 Sportback | 2018-2023 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- A6 | 2006-2018 | Base, Premium, Premium Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
- A6 Quattro | 2005-2023 | Avant, Base, Competition, Premium, Premium Plus, Prestige, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.0 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.2 L GAS, 8 Cyl 4.2 L GAS
View More
View related parts
Audi Valve Spring Retainers Part Number: 058-109-641-E
$12.12 MSRP: $18.94
You Save: $6.82 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate; Valve Spring Retainers
- Replaces: 058-109-641-B
Fits the following Audi Models:
- A4 | 1997-2006 | Base, Cabriolet | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- A4 Quattro | 1997-2006 | Avant, Base, Cabriolet | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- A6 | 2000-2004 | Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- A6 Quattro | 2000-2004 | Avant, Base | 6 Cyl 2.7 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
- A8 | 1997-1999 | Base | 8 Cyl 3.7 L GAS
- A8 Quattro | 1997-1999 | Base | 8 Cyl 4.2 L GAS
- Allroad Quattro | 2001-2005 | Base | 6 Cyl 2.7 L GAS
- S4 | 2000-2002 | Avant, Base | 6 Cyl 2.7 L GAS
- TT | 2000-2006 | Base | 4 Cyl 1.8 L GAS
- TT Quattro | 2000-2006 | ALMS Edition, Base | 4 Cyl 1.8 L GAS
View More
View related parts
Audi Valve Spring Retainers Part Number: 077-109-641-G
$12.61 MSRP: $20.18
You Save: $7.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate
Fits the following Audi Models:
- A6 Quattro | 2000-2005 | Base | 8 Cyl 4.2 L GAS
- A8 Quattro | 2000-2006 | Base, L | 8 Cyl 4.2 L GAS
- Allroad Quattro | 2004-2005 | Base | 8 Cyl 4.2 L GAS
- RS4 | 2007 | Base | 8 Cyl 4.2 L GAS
- S4 | 2009, 2004-2007 | Avant, Base, Cabriolet | 8 Cyl 4.2 L GAS
- S6 | 2002-2003 | Avant | 8 Cyl 4.2 L GAS
- S8 | 2001-2003 | Base | 8 Cyl 4.2 L GAS
View More
View related parts
Audi Valve Spring Retainers Part Number: 078-109-641-C
$12.61 MSRP: $20.18
You Save: $7.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate
Fits the following Audi Models:
- 90 | 1995 | Base, Sport | 6 Cyl 2.8 L GAS
- 90 Quattro | 1995 | Base, Sport | 6 Cyl 2.8 L GAS
- A4 | 1996-1999 | Avant, Base | 6 Cyl 2.8 L GAS
- A4 Quattro | 1996-1999 | Avant, Base | 6 Cyl 2.8 L GAS
- A6 | 1995-1999 | Avant, Base | 6 Cyl 2.8 L GAS
- A6 Quattro | 1995-1999 | Avant, Base | 6 Cyl 2.8 L GAS
- Cabriolet | 1995-1998 | Base | 6 Cyl 2.8 L GAS
View More
View related parts
Audi Valve Spring Retainers Part Number: 059-109-641-K
$12.61 MSRP: $20.18
You Save: $7.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate; Valve Spring Seats
Fits the following Audi Models:
- A3 | 2015-2016, 2010-2013 | TDI, TDI Premium, TDI Premium Plus, TDI Prestige | 4 Cyl 2.0 L DIESEL
- A6 Quattro | 2014-2016 | TDI Premium Plus, TDI Prestige | 6 Cyl 3.0 L DIESEL
- A7 Quattro | 2014-2016 | TDI Premium Plus, TDI Prestige | 6 Cyl 3.0 L DIESEL
- A8 Quattro | 2014-2016 | L TDI | 6 Cyl 3.0 L DIESEL
- Q5 | 2014-2016 | TDI Premium Plus, TDI Premium Plus S-Line, TDI Prestige, TDI Prestige S-Line | 6 Cyl 3.0 L DIESEL
- Q7 | 2009-2015 | TDI, TDI Premium, TDI Premium Plus, TDI Prestige | 6 Cyl 3.0 L DIESEL
View More
View related parts
Audi Valve Spring Retainers Part Number: 0P2-109-629
$2.19 MSRP: $3.42
You Save: $1.23 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate; Valve Spring Retainers
Fits the following Audi Models:
- RS Q8 | 2020-2023 | Base | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- RS6 Avant | 2021-2023 | Base | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- RS7 Sportback | 2021-2023 | Base | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
- SQ8 | 2020-2023 | Premium Plus, Prestige | 8 Cyl 4.0 L MILD HYBRID EV-GAS (MHEV)
View More
View related parts
Audi Valve Spring Retainers Part Number: 022-109-641-B
$12.57 MSRP: $19.64
You Save: $7.07 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate
Fits the following Audi Models:
- A3 Quattro | 2006-2009 | Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
- A8 Quattro | 2012-2016, 2005-2009 | L, L W12 | 12 Cyl 6.0 L GAS, 12 Cyl 6.3 L GAS
- Q7 | 2007-2010 | Base, Premium | 6 Cyl 3.6 L GAS
- TT Quattro | 2008-2009, 2004-2006 | Base, Special Edition | 6 Cyl 3.2 L GAS
View More

Audi Valve Spring Retainer

Audi Valve Spring Retainer secures each valve spring directly against the valve stem, allowing the engine to maintain perfect timing even at hard acceleration or while cruising on the highway for long periods. Audi has a global reputation for integrating performance and everyday comfort from the original water-cooled engines to today's e-tron electric drivetrains and its trademark Quattro all-wheel system, which keeps drivers confident in snow or rain. The brand also leads with Virtual Cockpit digital gauges and clever matrix headlights that brighten up the roads at night without blinding oncoming traffic, proof that Audi places technology at the center of every mile. This dedication to precision is echoed by the Valve Spring Retainer, a small but important part that is resistant to extreme heat and high RPM forces, ensuring the intake and exhaust valves open and close precisely when the camshaft commands them. A sturdy yet light construction reduces rotating mass while contributing to avoiding valve float and maintaining compression, which translates into smooth power delivery across the entire Audi lineup. When springs wear out over time, the Valve Spring Retainer still holds tight, protecting cylinders from misfire and expensive damage until regular service brings back maximum clamping force. By combining state-of-the-art vehicles with reliable hardware such as the Audi Valve Spring Retainer, the company can guarantee that longevity keeps up with excitement, helping their owners know that every time they hit the road will be as fresh as the first.

Stick with genuine OEM Valve Spring Retainer when you need quality that holds up. Audi crafts these parts to hit strict factory specs for every single unit. They also run each part through rigorous checks during production to maintain high quality. You can find exact Audi Valve Spring Retainer you need in our huge stock at AudiPartsGiant.com. You'll love our low, economical prices too. Every OEM part carries a real manufacturer's warranty, so you can buy with confidence. Returns aren't a headache here because our policy is simple. Plus, our speedy delivery gets orders out fast. Shop today and buy with total peace of mind.

Audi Valve Spring Retainer Parts and Q&A

Valve Spring Retainers
058-109-641-E
Q: Can broken Valve Spring, Valve Spring Retainer and Valve Stem Oil Seal be replaced without removing the cylinder heads on Audi A4?
A:
The replacement of broken valve springs and defective valve stem seals may be performed without the removal of the cylinder heads, and is commonly done with two special tools and a source of compressed air. Start with the valve cover, camshaft, the lifters and observe that in the 2.0L four-cylinder there is a requirement to have the cylinder head removed to get to the camshafts. Take off the spark plug of the cylinder which contains the defective part and in case you take off all the seals of the valve stems, take off all the spark plugs. Rotate the crankshaft until the piston in the given cylinder reaches Top Dead Center on the compression stroke one cylinder at a time in the firing order. Insert an air hose connector into the spark plug hole and hook it up to a pressurized air source forcing air into the valves to keep them in place. Insert stuff shop rags into the holes in the cylinder head to ensure that parts will not collect in the engine. Tap the top of each valve spring retainer to loosen the connection between the valve keeper and the spring retainer and carefully trim the spring to take the keepers out with the help of a valve spring compressor. Take away the valve spring and retainer, remembering that in case air pressure does not hold the valve down, the cylinder head might have to be taken off to fix it. Take off the old valve stem seals, taking note to differentiate between intake and exhaust seals. Tape or wrap a rubber band around the top of the valve stem to ensure that it does not fall into the combustion chamber and then release the air pressure. Check the valve stem damage and look at the eccentricity of the movement of the valve and binding in the guide, that can be the sign of bent valve or broken guide, in this case, the head of the valve has to be removed and then repaired. Use air pressure again to hold the valve in the closed position, and remove the tape or the rubber band. Coat the valve stem with engine oil and replace the valve guide seal using a new one and beating it in the slot. Fit the valve spring and retainer, squeeze the spring, and place the keepers on carefully and place a small dab of grease to hold them in. Lift the pressure of the spring tool and make sure that the keepers are in place. Turn off the air hose and take out the adapter of the spark plug hole and fit in the camshaft, lifters, timing belt, and valve cover. Lastly, screw the spark plug(s) into place and the ignition coil(s), change the engine on and listen to it, looking out of the valve cover region.