What critical precautions should be taken when servicing the fuel tank of a diesel fuel system, focusing on high-pressure injection risks on Audi 100?

Look at the precautions to be taken before handling any part of the fuel system. First empty as much fuel as possible and preferably leave the tank nearly full as no drain plug is fitted. Untrace the negative cable of the battery and do not touch it on the terminal. Where possible, a hand pump or a siphon can be used to clean the tank of any remaining fuel. Unfreeze the wiring harness to the sender unit, fuel supply and return hoses. Unscrew the screw holding the filler neck in place to the body and open the filler flap. Lift the rear of the car and place it on axle stands, which are chocked at the front. Take off the right-hand rear roadwheel and unbolt the wheel arch liner. Unhook the overflow hose not connected to the filler neck, unhook the clip and unhook the filler hose not connected to the fuel tank and pull it out of the underside of the car. Lay a trolley jack in the middle of the tank with a block of wood so as not to damage the tank, raise the jack until it can hold the weight of the tank. Unscrew the nuts that are clamping the tank straps onto the underbody and unscrew the straps, then reduce the jack, with the tank stationary and then take it out beneath the car. In the event that a new tank is to be fitted, replace the heat shield on the old unit. In case the tank is contaminated, change the sender unit and clean it with fresh fuel, remember that the tank must be changed in case of damage, but slight repairs can be made. To refit, reverse the removal process, make sure mounting rubbers and packing are in place, hoses are not caught up, and that all pipes and hoses are firmly fixed. Lastly, fill the tank with fuel and ensure there are no leaks then proceed to the road with the vehicle.

What key precautions should be taken when working on the fuel tank of a petrol/gasoline fuel system, given the fire risk for Petrol engines on Audi A3?

Note the precautions required to be followed before operating upon any part of the fuel system. In order to eliminate the tank, empty the fuel, preferably to the last drop as there is no drain plug. Unscrew the fuel filler flap cap, leaving it on the loosely fitting part of the fuel filler. Disassemble the battery negative lead and place it out of the terminal and empty any left-over tank fuel using a hand pump or siphon. Tighten the bolts attaching the right-hand rear wheel, jack-up the rear of the car, and remove the right-hand rear wheel and the wheel arch liner. Unscrew the wiring harness on the top of the fuel pump/sender unit. Unscrew the fuel filler flap unit retaining screw and loosen the flap unit and retrieve the rubber seal. Unbolt filler pipe on the body, mounting rubbers, and prop up the rear of the exhaust system in order to remove the tank. Break off the fuel and charcoal canister breather lines, when required. Place a trolley jack under the center of the tank using a block of wood to avoid any damage and then use the jack to lift the tank to the weight of the tank. Unscrew the mounting bolt and loosen the tank strap and then lower the jack and the tank off the vehicle. When the tank is contaminated, then take out the fuel pump/sender unit and wipe it with new fuel, however, the tank itself should be replaced in case of damage but in minor cases, specific advice may be provided and it may be repaired. To be refitted, reverse steps of the extracting process, make sure that mounting rubbers are in place, hoses are not kinked and that all the pipes are firmly fixed in position. Install tank strap bearing bolt to the required specifications, refuel the tank, and inspect thoroughly, and before going on the road.

Genuine Audi Fuel Tank

Gas Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

126 Fuel Tanks found

View related parts
Audi Fuel Tank Part Number: 8D0-201-075-P
$368.54 MSRP: $516.17
You Save: $147.63 (29%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Audi Models:
- A4 | 1998-1999 | Avant, Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Audi Fuel Tank Part Number: 5Q0-201-055-BG
$380.03 MSRP: $532.25
You Save: $152.22 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
- Replaces: 5Q0-201-055-T
Fits the following Audi Models:
- A3 | 2015-2020 | Premium, Premium Plus, Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- A3 Quattro | 2015-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- S3 | 2015-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View More
View related parts
Audi Tank Assembly Part Number: 4G0-131-879-F
$702.92 MSRP: $908.75
You Save: $205.83 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Container; Tank Assembly
- Replaces: 4G0-131-879-C, 4G0-131-879-A
Fits the following Audi Models:
- A6 Quattro | 2014-2016 | TDI Premium Plus, TDI Prestige | 6 Cyl 3.0 L DIESEL
- A7 Quattro | 2014-2016 | TDI Premium Plus, TDI Prestige | 6 Cyl 3.0 L DIESEL
View related parts
Audi Fuel Tank Part Number: 5QF-201-060-AN
$368.13 MSRP: $515.58
You Save: $147.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- Q3 | 2019-2024 | Premium, Premium Plus, Prestige, S-Line Premium, S-Line Premium Plus, S-Line Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi Fuel Tank Part Number: 5Q0-201-055-CN
$706.86 MSRP: $913.84
You Save: $206.98 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
- Replaces: 5Q0-201-055-AC
Fits the following Audi Models:
- A3 | 2015-2020 | Premium, Premium Plus, Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- A3 Quattro | 2015-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- S3 | 2015-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 4B0-201-060-E
$742.56 MSRP: $960.00
You Save: $217.44 (23%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Audi Models:
- A6 | 1999-2004 | Base | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi Fuel Tank Part Number: 8D0-201-075-K
$765.77 MSRP: $990.00
You Save: $224.23 (23%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Audi Models:
- A4 | 1996-1997 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Audi Fuel Tank Part Number: 4B0-201-060-AA
$792.84 MSRP: $1025.00
You Save: $232.16 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank
- Replaces: 4B0-201-060-B, 4B0-201-060-P
Fits the following Audi Models:
- A6 | 1998 | Base | 6 Cyl 2.8 L GAS
- A6 Quattro | 1999-2004 | Avant, Base | 6 Cyl 2.7 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi Fuel Tank Part Number: 8J0-201-060-B
$937.11 MSRP: $1211.53
You Save: $274.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Audi Models:
- TT | 2008-2009 | Base | 4 Cyl 2.0 L GAS
- TT Quattro | 2008-2009 | Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
- TTS Quattro | 2009 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 8J0-201-060-M
$1049.45 MSRP: $1356.76
You Save: $307.31 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 8J0-201-060-H, 8J0-201-060-K
Fits the following Audi Models:
- TT | 2008-2009 | Base | 4 Cyl 2.0 L GAS
- TT Quattro | 2008-2015 | Base, Premium Plus, Prestige | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
- TT RS Quattro | 2012-2013 | Base | 5 Cyl 2.5 L GAS
- TTS Quattro | 2009-2015 | Base | 4 Cyl 2.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 8D0-201-060-B
$850.85 MSRP: $1100.00
You Save: $249.15 (23%)
Ships in 1-2 Business Days
ADD TO CART
Fits the following Audi Models:
- A4 | 2000-2001 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Audi Fuel Tank Part Number: 1K0-201-055-AQ
$1246.51 MSRP: $1496.42
You Save: $249.91 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank
- Replaces: 1K0-201-055-T, 1K0-201-055-AN
Fits the following Audi Models:
- A3 | 2006-2013 | Base, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
- A3 Quattro | 2006-2013 | Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi Reserve Tank Part Number: 4L0-131-877-E
$1038.14 MSRP: $1342.14
You Save: $304.00 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Reserve Tank, Reservoir
- Replaces: 4L0-131-877-C, 4L0-131-877-A, 4L0-131-877-D, 4L0-131-877-B
Fits the following Audi Models:
- Q7 | 2009-2015 | TDI, TDI Premium, TDI Premium Plus, TDI Prestige | 6 Cyl 3.0 L DIESEL
View related parts
Audi Fuel Tank Part Number: 8W6-201-060-BE
$895.06 MSRP: $1157.15
You Save: $262.09 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- A5 Quattro | 2021-2023 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- A5 Sportback | 2021-2023 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- S5 | 2021-2023 | Premium, Premium Plus, Prestige | 6 Cyl 3.0 L GAS
- S5 Sportback | 2021-2023 | Premium, Premium Plus, Prestige | 6 Cyl 3.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 80A-201-060-BG
$1051.37 MSRP: $1359.23
You Save: $307.86 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- Q5 | 2021-2023 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L MILD HYBRID EV-GAS (MHEV)
- Q5 PHEV | 2020-2023 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L PLUG-IN HYBRID EV-GAS (PHEV)
View related parts
Audi Fuel Tank Part Number: 8W6-201-060-BC
$1606.50 MSRP: $1928.57
You Save: $322.07 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- A5 Quattro | 2019-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- A5 Sportback | 2019-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- S5 | 2019-2020 | Premium, Premium Plus, Prestige | 6 Cyl 3.0 L GAS
- S5 Sportback | 2019-2020 | Premium, Premium Plus, Prestige | 6 Cyl 3.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 8W0-201-060-DF
$2047.99 MSRP: $2458.57
You Save: $410.58 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- A4 | 2019-2020 | Premium, Premium Plus, Prestige, Titanium | 4 Cyl 2.0 L GAS
- A4 Quattro | 2019-2020 | Premium, Premium Plus, Prestige, Ultra sport | 4 Cyl 2.0 L GAS
- A4 allroad | 2019-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- S4 | 2019-2020 | Premium, Premium Plus, Prestige | 6 Cyl 3.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 5Q0-201-060-ET
$1365.51 MSRP: $1639.28
You Save: $273.77 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- A3 | 2015-2016 | TDI Premium, TDI Premium Plus, TDI Prestige | 4 Cyl 2.0 L DIESEL
View related parts
Audi Fuel Tank Part Number: 5WA-201-055-C
$386.46 MSRP: $541.26
You Save: $154.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tank; Fuel Tank
- Replaces: 5Q0-201-055-CH
Fits the following Audi Models:
- A3 | 2022-2024, 2019-2020 | Premium, Premium Plus, Prestige, Titanium | 4 Cyl 2.0 L GAS
- A3 Quattro | 2019-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
- S3 | 2019-2020 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View More
View related parts
Audi Fuel Tank Part Number: 3B0-201-075-BK
Product Specifications
- Other Name: Tank; Fuel Tank
Fits the following Audi Models:
- A4 Quattro | 1996-1999 | Avant, Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS

| Page 1 of 7 |Next >

1-20 of 126 Results

Audi Fuel Tank

There are components like the pump, filter tank, and injectors in the fuel system, all of which are the key to how the car will perform on the road. When you go to the filling station to top up your car and pump gasoline, the fuel drains through this filler tube and fills the car's tank. Sending a unit within a gas tank reveals how much gasoline is in it, and the process conveys this to the gauge panel within your vehicle. With time, technological advancements have made Audi fuel tanks more sophisticated. Today, they are mostly fitted with fuel pumps and more emission control mechanisms, ensuring the vapor does not diffuse into the environment. This part may not indicate an exact amount or transmit accurate information concerning the gasoline quantity at certain times. Also, a leak can result in possible loss of gasoline in an Audi fuel tank, while driving low on these levels can also destroy an engine. To be on the safe side, always check your fuel system (the tanks and the other parts, too) as often as possible to avoid compromising its efficiency or risking an avoidable mishap.

It is better to choose OEM parts when it comes to the time for fixing them. Why? Because they fit perfectly well and ensure safety. For people who prefer doing their maintenance, the genuine Audi Fuel Tank is quite perfect. At AudiPartsGiant.com, we specialize in genuine Audi Fuel Tanks only. Also, we offer an extensive online catalog with many categories, ample stock, and secure shopping. The Audi Fuel Tank is shipped directly from authorized Audi dealers at competitive prices. So trust us, and we will give you nothing but superior service. Depend on us for all your genuine parts needs, and then we will keep your automobile moving smoothly.

Audi Fuel Tank Parts and Q&A

Fuel Tank
443-201-075-AL
Q: What critical precautions should be taken when servicing the fuel tank of a diesel fuel system, focusing on high-pressure injection risks on Audi 100?
A:
Look at the precautions to be taken before handling any part of the fuel system. First empty as much fuel as possible and preferably leave the tank nearly full as no drain plug is fitted. Untrace the negative cable of the battery and do not touch it on the terminal. Where possible, a hand pump or a siphon can be used to clean the tank of any remaining fuel. Unfreeze the wiring harness to the sender unit, fuel supply and return hoses. Unscrew the screw holding the filler neck in place to the body and open the filler flap. Lift the rear of the car and place it on axle stands, which are chocked at the front. Take off the right-hand rear roadwheel and unbolt the wheel arch liner. Unhook the overflow hose not connected to the filler neck, unhook the clip and unhook the filler hose not connected to the fuel tank and pull it out of the underside of the car. Lay a trolley jack in the middle of the tank with a block of wood so as not to damage the tank, raise the jack until it can hold the weight of the tank. Unscrew the nuts that are clamping the tank straps onto the underbody and unscrew the straps, then reduce the jack, with the tank stationary and then take it out beneath the car. In the event that a new tank is to be fitted, replace the heat shield on the old unit. In case the tank is contaminated, change the sender unit and clean it with fresh fuel, remember that the tank must be changed in case of damage, but slight repairs can be made. To refit, reverse the removal process, make sure mounting rubbers and packing are in place, hoses are not caught up, and that all pipes and hoses are firmly fixed. Lastly, fill the tank with fuel and ensure there are no leaks then proceed to the road with the vehicle.
Fuel Tank
1K0-201-055-AM
Q: What key precautions should be taken when working on the fuel tank of a petrol/gasoline fuel system, given the fire risk for Petrol engines on Audi A3?
A:
Note the precautions required to be followed before operating upon any part of the fuel system. In order to eliminate the tank, empty the fuel, preferably to the last drop as there is no drain plug. Unscrew the fuel filler flap cap, leaving it on the loosely fitting part of the fuel filler. Disassemble the battery negative lead and place it out of the terminal and empty any left-over tank fuel using a hand pump or siphon. Tighten the bolts attaching the right-hand rear wheel, jack-up the rear of the car, and remove the right-hand rear wheel and the wheel arch liner. Unscrew the wiring harness on the top of the fuel pump/sender unit. Unscrew the fuel filler flap unit retaining screw and loosen the flap unit and retrieve the rubber seal. Unbolt filler pipe on the body, mounting rubbers, and prop up the rear of the exhaust system in order to remove the tank. Break off the fuel and charcoal canister breather lines, when required. Place a trolley jack under the center of the tank using a block of wood to avoid any damage and then use the jack to lift the tank to the weight of the tank. Unscrew the mounting bolt and loosen the tank strap and then lower the jack and the tank off the vehicle. When the tank is contaminated, then take out the fuel pump/sender unit and wipe it with new fuel, however, the tank itself should be replaced in case of damage but in minor cases, specific advice may be provided and it may be repaired. To be refitted, reverse steps of the extracting process, make sure that mounting rubbers are in place, hoses are not kinked and that all the pipes are firmly fixed in position. Install tank strap bearing bolt to the required specifications, refuel the tank, and inspect thoroughly, and before going on the road.