Carefully pry out the rear ashtray and disconnect the electrical connectors for the door lock switch and seat heater switch if equipped. Remove the rear switch mount by pressing both corner tabs towards the sides, rotating the mount down and out, and disconnecting the electrical connectors. From the rear of the console, remove the center armrest mounting nut and lift the armrest out; if equipped with a center armrest phone, depress the tab on the connector and separate the harness. Remove the parking brake trim cover from the center console, starting at the front and working towards the back, using a trim tool to pry it out. Pry up the shift cover from the sides and remove the cover and boot, working from the front. Carefully pry the button trim away from the top of the console and remove it using a small screwdriver. Remove the radio assembly and the air conditioning control assembly. Remove the plastic access plugs from both lower edges at the front of the console and take out the fasteners. With the handbrake lever applied, depress the retaining clip and release it at the base of the parking brake grip, then pull the lever grip from the lever. Remove the parking brake carrier fasteners and carrier. For vehicles with automatic transmissions, move the shift selector all the way to the back. Remove the front ashtray fasteners and ashtray, disconnecting the electrical connector once the ashtray is removed. Disconnect the center console lighter by depressing the two corner tabs with a small screwdriver, then remove the assembly and disconnect the electrical connector. Remove the fasteners at the top front and sides of the console, as well as the rear mounting nuts. Partially withdraw the console, disconnect the navigation control head wiring, and then remove the console by lifting it from the rear over the brake lever. Installation is the reverse of removal, ensuring that the ashtray/cigar lighter and navigation control head wiring are reconnected, and that the center armrest phone connector is installed correctly, with the clips at the front lower edges of the console engaging with the instrument panel support framework.