Start with emptying the A/C Condenser. The second step is to hoist the vehicle and place it in jackstands. Take off the splash shield under the engine (when it is there). Removal of the front bumper assembly. Disconnect the power steering oil cooler line at the radiator support panel and put it aside, disconnecting the A/C Condenser pressure switch and ambient temperature sensor. Provided it is equipped, displace the cooling fan control module by extracting the fastener of mount. Unplug the A/C Condenser pressure switch and ambient temperature sensor with the driver side of the radiator, being careful to push the harness aside. Loosen the condenser fasteners so as to detach the condenser and the radiator. To install, follow the instructions in the reverse direction when removing, with new O-rings on fittings of A/C systems. In case of replacement of the condenser, pour in fresh refrigerant oil to the replacement unit, and this must be R-134a compatible. Lastly, evacuate, recharge, and leak test the system at the shop which emptied it.