What are the essential adjustments for the Camber and Alignment Kit in a steering and suspension geometry on Audi A3?

A car's steering and suspension geometry is defined by three basic settings, with all angles expressed in degrees; the steering axis is an imaginary line through the suspension strut's axis, extended to contact the ground. Camber refers to the angle between each roadwheel and a vertical line through its center and tyre contact patch, viewed from the front or rear; positive camber indicates the roadwheels tilt outwards at the top, while negative camber indicates an inward tilt. Adjusting camber angle involves loosening the front suspension subframe mounting bolts and shifting it slightly, which also affects the castor angle, and can be checked with a camber checking gauge. Castor is the angle between the steering axis and a vertical line through each roadwheel's center and tyre contact patch, viewed from the side; positive castor means the steering axis tilts forward of the vertical, while negative castor tilts it backward. Adjustments to castor are limited and primarily for reference; significant deviations from specified values require professional inspection due to potential wear or damage. Toe is the difference between lines drawn through the roadwheel centers and the car's center-line, with toe-in indicating inward pointing roadwheels and toe-out indicating outward splaying. The front wheel toe setting is adjusted by screwing the track rod(s) in or out of the outer balljoint(s), while the rear wheel toe setting is not adjustable and requires professional inspection if significantly different from specified values. Given the specialized equipment and skill needed for checking wheel alignment, it is advisable to leave these tasks to an Audi dealer or similar expert, although many tyre-fitting centers now have advanced checking equipment.

Genuine Audi A3 Camber and Alignment Kit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

71 Camber and Alignment Kits found

View related parts
Audi A3 Instrument Panel Retainer Nut Part Number: N-108-280-01
$0.31 MSRP: $0.48
You Save: $0.17 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Lower Control Arm Adjust Bolt Part Number: WHT-000-228
$20.86 MSRP: $33.38
You Save: $12.52 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw
- Position: Lower
- Replaces: 1K0-501-387-D
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020, 2006-2013 Audi A3 | Base, Premium, Premium Plus, Prestige, TDI, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Lower Reinforcement Mount Bolt Part Number: N-106-730-01
$0.55 MSRP: $0.86
You Save: $0.31 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Position: Upper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2019 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Retaining Bracket Bolt Part Number: N-904-570-03
$1.60 MSRP: $2.50
You Save: $0.90 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Replaces: N-904-570-01
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024, 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Support Screw Part Number: N-107-861-01
$0.93 MSRP: $1.46
You Save: $0.53 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw; Support Screw
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Stabilizer Link Lock Nut Part Number: N-102-861-11
$2.28 MSRP: $3.55
You Save: $1.27 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2006-2013 Audi A3 | Base, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Gear Assembly Retainer Nut Part Number: N-104-355-06
$2.28 MSRP: $3.55
You Save: $1.27 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut
- Replaces: N-104-355-02
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2019 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Radiator Support Retainer Part Number: WHT-002-535
$2.07 MSRP: $3.24
You Save: $1.17 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Support Bracket Lower Bolt Part Number: N-906-847-05
$1.97 MSRP: $3.08
You Save: $1.11 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020, 2008 Audi A3 | Base, Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Impact Bar Mount Bolt Part Number: N-905-818-04
$2.79 MSRP: $4.36
You Save: $1.57 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Replaces: N-905-818-02
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024, 2015-2020, 2006-2013 Audi A3 | Base, Premium, Premium Plus, Prestige, TDI, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Lower Control Arm Mount Bolt Part Number: N-106-405-01
$2.76 MSRP: $4.32
You Save: $1.56 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Position: Rear
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Radiator Support Bolt Part Number: N-911-757-01
$2.29 MSRP: $3.59
You Save: $1.30 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt; Upper Support Bolt
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2017 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Control Module Retainer Screw Part Number: N-106-447-01
$3.11 MSRP: $4.86
You Save: $1.75 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2006-2008 Audi A3 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Suspension Crossmember Mount Bolt Part Number: N-912-003-01
$3.46 MSRP: $5.40
You Save: $1.94 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw; Suspension Crossmember Mount Bolt
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2019 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Radiator Support Retainer Part Number: WHT-005-296
$2.96 MSRP: $4.61
You Save: $1.65 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Speed Nut
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Headlamp Mounting Upper Bolt Part Number: 8K0-805-399-A
$2.96 MSRP: $4.61
You Save: $1.65 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Position: Upper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024, 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Radiator Support Mount Bolt Part Number: N-910-702-01
$2.96 MSRP: $4.61
You Save: $1.65 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt
- Position: Center
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024, 2015-2020, 2006-2013 Audi A3 | Base, Premium, Premium Plus, Prestige, TDI, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Top Nut Part Number: N-102-951-01
$3.28 MSRP: $5.13
You Save: $1.85 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nut
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Radiator Support Mount Bolt Part Number: N-912-588-01
$2.96 MSRP: $4.61
You Save: $1.65 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bolt; Radiator Support Bolt, Radiator Support Mount Bolt
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024, 2017-2020 Audi A3 | Premium, Premium Plus, Prestige, Titanium | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Power Steering Pump Mount Bolt Part Number: N-911-287-01
$4.45 MSRP: $6.96
You Save: $2.51 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Screw
- Replaces: N-102-258-01
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024, 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS

| Page 1 of 4 |Next >

1-20 of 71 Results

Audi A3 Camber and Alignment Kit

Choose original equipment manufacturer Camber and Alignment Kit for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Camber and Alignment Kit at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi A3 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your A3 needs now.

Audi A3 Camber and Alignment Kit Parts and Q&A

Top Nut
8J0-512-041
Q: What are the essential adjustments for the Camber and Alignment Kit in a steering and suspension geometry on Audi A3?
A:
A car's steering and suspension geometry is defined by three basic settings, with all angles expressed in degrees; the steering axis is an imaginary line through the suspension strut's axis, extended to contact the ground. Camber refers to the angle between each roadwheel and a vertical line through its center and tyre contact patch, viewed from the front or rear; positive camber indicates the roadwheels tilt outwards at the top, while negative camber indicates an inward tilt. Adjusting camber angle involves loosening the front suspension subframe mounting bolts and shifting it slightly, which also affects the castor angle, and can be checked with a camber checking gauge. Castor is the angle between the steering axis and a vertical line through each roadwheel's center and tyre contact patch, viewed from the side; positive castor means the steering axis tilts forward of the vertical, while negative castor tilts it backward. Adjustments to castor are limited and primarily for reference; significant deviations from specified values require professional inspection due to potential wear or damage. Toe is the difference between lines drawn through the roadwheel centers and the car's center-line, with toe-in indicating inward pointing roadwheels and toe-out indicating outward splaying. The front wheel toe setting is adjusted by screwing the track rod(s) in or out of the outer balljoint(s), while the rear wheel toe setting is not adjustable and requires professional inspection if significantly different from specified values. Given the specialized equipment and skill needed for checking wheel alignment, it is advisable to leave these tasks to an Audi dealer or similar expert, although many tyre-fitting centers now have advanced checking equipment.