How to remove and replace the Wheel Seal in the intermediate shaft sprocket on 1992 Audi 100?

Remove the intermediate shaft sprocket. Drill two small holes in the oil seal and thread self-tapping screws into them. Use pliers to extract the seal. Clean the seal flange and camshaft surface. Lubricate the new oil seal and drive it into place. Renew the O-ring if the flange is removed, then refit the sprocket.

Genuine 1992 Audi 100 Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wheel Seals found

View related parts
1992 Audi 100 Bearing Grease Seal Part Number: 357-501-641-B
$28.99 MSRP: $46.38
You Save: $17.39 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Bearing Seal, Hub Seal, Inner Bearing Seal
- Replaces: 357-501-641-C
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 357-501-641-B
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 100 Submodels:
- Base, CS, E, S | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Caliper Overhaul Kit Part Number: 8D0-698-671
$34.63 MSRP: $55.40
You Save: $20.77 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Set Seals; Caliper Overhaul Kit, Caliper Seal Kit, Dust Seal
- Replaces: 535-698-671
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8D0-698-671
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 100 Submodels:
- Base, CS, E, S | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Axle Seals Part Number: 017-525-400-A
$69.97 MSRP: $98.00
You Save: $28.03 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal; Axle Seal
- Position: Outer
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 017-525-400-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, E, S | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS

1992 Audi 100 Wheel Seal Parts and Q&A

Q: How to remove and replace the Wheel Seal in the intermediate shaft sprocket on 1992 Audi 100?
A: Remove the intermediate shaft sprocket. Drill two small holes in the oil seal and thread self-tapping screws into them. Use pliers to extract the seal. Clean the seal flange and camshaft surface. Lubricate the new oil seal and drive it into place. Renew the O-ring if the flange is removed, then refit the sprocket.