What steps are required for refitting the Track Bar and ensuring proper installation on 1992 Audi 100?

Refitting requires new mounting bolt nuts. Chock the front wheels, jack up the rear and prop it on axle stands. Place a jack below the back axle. Take out nuts and washers on mounting bolts of panhard rods. Check rod bushes on damage. Install the panhard rod and make sure that it is in place. Bend down and fasten bolts.

Genuine 1992 Audi 100 Track Bar

Axle Track Bar

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Track Bars found

View related parts
1992 Audi 100 Track Bar Part Number: 4A0-505-175
$84.49 MSRP: $118.33
You Save: $33.84 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Item Weight: 4.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-505-175
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Track Arm Assembly Part Number: 443-505-351-P
$148.51 MSRP: $208.00
You Save: $59.49 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Arm; Lower Control Arm, Tie Rod, Track Bar
- Position: Left
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 443-505-351-P
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, E, S | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Track Arm Assembly Part Number: 443-505-352-P
$165.41 MSRP: $231.67
You Save: $66.26 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Arm; Lower Control Arm, Tie Rod, Track Bar
- Position: Right
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 443-505-352-P
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, E, S | 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS

1992 Audi 100 Track Bar Parts and Q&A

Q: What steps are required for refitting the Track Bar and ensuring proper installation on 1992 Audi 100?
A: Refitting requires new mounting bolt nuts. Chock the front wheels, jack up the rear and prop it on axle stands. Place a jack below the back axle. Take out nuts and washers on mounting bolts of panhard rods. Check rod bushes on damage. Install the panhard rod and make sure that it is in place. Bend down and fasten bolts.