How to inspect and replace the Engine Mount components for 4-cylinder diesel engines on 1992 Audi 100?

In order to inspect the vehicle, lift the front and place it on axle stands and then remove the undershield. Examine the mounting rubbers to see whether they are craked, hardened or no more attached to the metal; renew damaged or worn mounts. Make certain that all the fasteners are firmly tightened, with a torque wrench where possible. A large screwdriver or crowbar pushed against the mounting to examine it, and determine whether it has wear. When play happens to be in excess, ensure that the fasteners are tight and change worn parts. To replace the front torque arm, use the handbrake, jack up the front and put the front on axle stands. Unbolt the bracket to the front valance, remove the bolts to remove the torque arm and rubber mounting on the cylinder block and unbolt the bracket to the front valance. Installation is done by undoing the operations of removing the torque arm and bracket. In the right- or left-hand mounting of the engine, repeat the steps as in the front and hold the front with the handbrake, raise and place on axle stands. Put in place a hoist and lift the weight of the engine, undo the upper mounting nut, lift the engine and loosen the mounting off the bracket. Lastly, install the new mounting, inverting the unmounting process.

Genuine 1992 Audi 100 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Engine Mounts found

View related parts
1992 Audi 100 Engine Bracket Part Number: 8E0-199-352-N
$136.84 MSRP: $191.66
You Save: $54.82 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket; Engine Bracket, Mount
- Position: Right
- Replaces: 4B0-199-352-B, 8E0-199-352, 8E0-199-352-D, 8E0-199-352-F
- Item Weight: 3.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E0-199-352-N
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Mount Part Number: 4A0-199-339
$20.63 MSRP: $33.00
You Save: $12.37 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper; Mount
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-199-339
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Mount Part Number: 4A0-199-339-A
$24.38 MSRP: $39.00
You Save: $14.62 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper; Mount
- Item Weight: 3.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-199-339-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Stop Part Number: 4A0-199-335-A
$33.75 MSRP: $54.00
You Save: $20.25 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-199-335-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Engine Support Part Number: 8A0-199-308-G
$84.25 MSRP: $118.00
You Save: $33.75 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support
- Position: Right
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A0-199-308-G
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Engine Support Part Number: 4A0-199-307-M
$149.94 MSRP: $210.00
You Save: $60.06 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support
- Position: Left
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-199-307-M
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Engine Bracket Part Number: 4A0-199-351-B
$351.29 MSRP: $492.00
You Save: $140.71 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket
- Position: Left
- Replaces: 4A0-199-351-A
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-199-351-B
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Engine Bracket Part Number: 4A0-199-352-A
$351.29 MSRP: $492.00
You Save: $140.71 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket
- Position: Right
- Replaces: 4A0-199-352
- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-199-352-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS

1992 Audi 100 Engine Mount Parts and Q&A

Q: How to inspect and replace the Engine Mount components for 4-cylinder diesel engines on 1992 Audi 100?
A: In order to inspect the vehicle, lift the front and place it on axle stands and then remove the undershield. Examine the mounting rubbers to see whether they are craked, hardened or no more attached to the metal; renew damaged or worn mounts. Make certain that all the fasteners are firmly tightened, with a torque wrench where possible. A large screwdriver or crowbar pushed against the mounting to examine it, and determine whether it has wear. When play happens to be in excess, ensure that the fasteners are tight and change worn parts. To replace the front torque arm, use the handbrake, jack up the front and put the front on axle stands. Unbolt the bracket to the front valance, remove the bolts to remove the torque arm and rubber mounting on the cylinder block and unbolt the bracket to the front valance. Installation is done by undoing the operations of removing the torque arm and bracket. In the right- or left-hand mounting of the engine, repeat the steps as in the front and hold the front with the handbrake, raise and place on axle stands. Put in place a hoist and lift the weight of the engine, undo the upper mounting nut, lift the engine and loosen the mounting off the bracket. Lastly, install the new mounting, inverting the unmounting process.