How to remove and install the Door Lock Cylinder and door handle on Audi TT Quattro?

To remove/install lock cylinder, pull out/hold door handle and unscrew bolt to the stop using T10011 or equivalent, which releases lock cylinder housing. Avoid removing the bolt or screwing it fully in unless the lock cylinder is installed, since this will allow the locking ring to fall into the door. Gently pull the lock cylinder housing and cover trim straight out, being careful not to drop the backing gasket into the door. To remove the door handle, first remove the lock cylinder. Then use a pick tool to unclip the cable end from the door handle, then pivot the door handle out and away from the door. For the installation process, pivot the door handle back into the door, clip the cable end onto the door handle and clip it into place without pulling the cable tight from the operating lever. Lastly, fit the lock cylinder and check whether the door handle is working. If the cable is not properly installed, it will not open the door.

Genuine Audi TT Quattro Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Door Lock Cylinders found

View related parts
Audi TT Quattro Cylinder & Keys Part Number: 107-857-113-JC
$188.01 MSRP: $263.32
You Save: $75.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder; Cylinder & Key, Lock & Key, Lock Cylinder
- Replaces: 107-857-113-JB
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2015, 2000-2006 Audi TT Quattro | ALMS Edition, Base, Premium Plus, Prestige, Special Edition | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi TT Quattro Cylinder & Keys Part Number: 8L0-857-113-F
$174.92 MSRP: $244.99
You Save: $70.07 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder; Cylinder & Key, Lock & Key
- Replaces: 8L0-857-113-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2000-2006 Audi TT Quattro | ALMS Edition, Base, Special Edition | 4 Cyl 1.8 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi TT Quattro Cylinder & Keys Part Number: 8N0-837-167-B
$189.21 MSRP: $265.00
You Save: $75.79 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Zyl; Cylinder & Key
- Position: Driver Side
- Replaces: 8N0-837-167
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2000-2006 Audi TT Quattro | ALMS Edition, Base, Special Edition | 4 Cyl 1.8 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi TT Quattro Cylinder & Keys Part Number: 107-837-167-TB
$230.86 MSRP: $323.33
You Save: $92.47 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder; Cylinder & Key
- Position: Driver Side
- Replaces: 107-837-167-TA
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2000-2006 Audi TT Quattro | ALMS Edition, Base, Special Edition | 4 Cyl 1.8 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi TT Quattro Cylinder & Keys Part Number: 107-837-168-TB
$245.14 MSRP: $343.33
You Save: $98.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Cylinder; Cylinder & Key
- Position: Passenger Side
- Replaces: 107-837-168-TA
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2000-2006 Audi TT Quattro | ALMS Edition, Base, Special Edition | 4 Cyl 1.8 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi TT Quattro Lock Cylinder Part Number: 107-837-167-DQ
$295.12 MSRP: $413.33
You Save: $118.21 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2016-2023 Audi TT Quattro | Base | 4 Cyl 2.0 L GAS
View related parts
Audi TT Quattro Lock Cylinder Part Number: 107-837-167-BE
$297.50 MSRP: $416.67
You Save: $119.17 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2015 Audi TT Quattro | Base, Premium Plus, Prestige | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS

Audi TT Quattro Door Lock Cylinder

Choose original equipment manufacturer Door Lock Cylinder for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Door Lock Cylinder at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi TT Quattro and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your TT Quattro needs now.

Audi TT Quattro Door Lock Cylinder Parts and Q&A

Cylinder & Keys
107-837-167-TB
Q: How to remove and install the Door Lock Cylinder and door handle on Audi TT Quattro?
A:
To remove/install lock cylinder, pull out/hold door handle and unscrew bolt to the stop using T10011 or equivalent, which releases lock cylinder housing. Avoid removing the bolt or screwing it fully in unless the lock cylinder is installed, since this will allow the locking ring to fall into the door. Gently pull the lock cylinder housing and cover trim straight out, being careful not to drop the backing gasket into the door. To remove the door handle, first remove the lock cylinder. Then use a pick tool to unclip the cable end from the door handle, then pivot the door handle out and away from the door. For the installation process, pivot the door handle back into the door, clip the cable end onto the door handle and clip it into place without pulling the cable tight from the operating lever. Lastly, fit the lock cylinder and check whether the door handle is working. If the cable is not properly installed, it will not open the door.