How to remove and refit the Hood Release Cable on the bonnet on Audi A3?

To remove the hood release cable, first, locate the coupling at the rear of the right-hand side headlight and unhook the pivoting cover to release it, then detach the inner cable end. Next, remove the lock at the hood to release the cable by depressing the end fitting and pulling it out. For the rear section, release the coupling and unclip the driver's side sill trim panel from the footwell. Remove the lower facia panel above the pedal assembly by undoing the retaining screws, then take out the hood release lever after removing two securing screws. Unclip the outer cable from the lever bracket and detach the inner cable, followed by releasing the cable sealing grommet from the bulkhead. Carefully work along the cable's length, freeing it from retaining clips and ties, and disconnect the outer cable from under the crossmember on the lock housing. Tie a length of string to the end of the cable inside the vehicle and withdraw the cable into the engine compartment. Once free, untie the string and leave it in position for future use. For refitting, tie the inner end of the string to the new cable and use it to draw the hood release cable back into place, ensuring the rubber grommet in the bulkhead is fitted correctly and the cable is properly routed and secured. Finally, check the operation of the release lever and cable before closing the hood.

How should you lubricate the Door Hinge, Door Lock, Hood Hinge, Hood Latch and Hood Release Cable for Petrol engines on Audi A3?

Apply to the hinges of the bonnet, doors, and tailgate light general-purpose oil, and also lubricate all the latches, locks, and lock strikers. In the process, test the security and functioning of all the locks, and make adjustments as required. Also, variously grease the bonnet release mechanism and cable with an appropriate grease.

Genuine Audi A3 Hood Release Cable

Hood Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Release Cables found

View related parts
Audi A3 Release Cable Part Number: 8Y1-823-535
$64.96 MSRP: $90.97
You Save: $26.01 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable; Release Cable
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Release Cable Part Number: 8V1-823-535-B
$66.27 MSRP: $92.82
You Save: $26.55 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Replaces: 8V1-823-535-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Cable Assembly Cover Part Number: 8Y0-823-531
$42.46 MSRP: $58.48
You Save: $16.02 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bowden Cable
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Release Cable Part Number: 8V0-823-531-A
$43.79 MSRP: $60.32
You Save: $16.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bowden Cable; Release Cable
- Replaces: 8V0-823-531
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2015-2020 Audi A3 | Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Release Cable Part Number: 8Y0-823-529
$43.79 MSRP: $60.32
You Save: $16.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Release; Release Cable
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2022-2024 Audi A3 | Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Release Cable Part Number: 8P0-823-535-C
$49.23 MSRP: $67.81
You Save: $18.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Replaces: 8P0-823-535-B
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2006-2013 Audi A3 | Base, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Audi A3 Release Cable Part Number: 8P1-823-531-B
$45.68 MSRP: $62.91
You Save: $17.23 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2006-2008 Audi A3 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi A3 Release Cable Part Number: 8P1-823-531-G
$49.23 MSRP: $67.81
You Save: $18.58 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable
- Replaces: 8P1-823-531-F
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2013 Audi A3 | Base, TDI | 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS

Audi A3 Hood Release Cable

Choose original equipment manufacturer Hood Release Cable for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Hood Release Cable at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi A3 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your A3 needs now.

Audi A3 Hood Release Cable Parts and Q&A

Release Cable
8P0-823-535-C
Q: How to remove and refit the Hood Release Cable on the bonnet on Audi A3?
A:
To remove the hood release cable, first, locate the coupling at the rear of the right-hand side headlight and unhook the pivoting cover to release it, then detach the inner cable end. Next, remove the lock at the hood to release the cable by depressing the end fitting and pulling it out. For the rear section, release the coupling and unclip the driver's side sill trim panel from the footwell. Remove the lower facia panel above the pedal assembly by undoing the retaining screws, then take out the hood release lever after removing two securing screws. Unclip the outer cable from the lever bracket and detach the inner cable, followed by releasing the cable sealing grommet from the bulkhead. Carefully work along the cable's length, freeing it from retaining clips and ties, and disconnect the outer cable from under the crossmember on the lock housing. Tie a length of string to the end of the cable inside the vehicle and withdraw the cable into the engine compartment. Once free, untie the string and leave it in position for future use. For refitting, tie the inner end of the string to the new cable and use it to draw the hood release cable back into place, ensuring the rubber grommet in the bulkhead is fitted correctly and the cable is properly routed and secured. Finally, check the operation of the release lever and cable before closing the hood.
Release Cable
8P1-823-531-B
Q: How should you lubricate the Door Hinge, Door Lock, Hood Hinge, Hood Latch and Hood Release Cable for Petrol engines on Audi A3?
A:
Apply to the hinges of the bonnet, doors, and tailgate light general-purpose oil, and also lubricate all the latches, locks, and lock strikers. In the process, test the security and functioning of all the locks, and make adjustments as required. Also, variously grease the bonnet release mechanism and cable with an appropriate grease.