How to replace the Rack and Pinion Boot on the steering gear and track rod on 2015 Audi A3?

To change steering gear gaiters, clean, take off track rod end balljoint, unscrew locking nut, slide off gaiter, grease rack, install new gaiter without twisting, screw on, refit nut and balljoint as before. In the case of track rod replacement, take off gaiter, hold rack, loosen nut, change rod, tighten to spec, refit, check alignment.

Genuine 2015 Audi A3 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
2015 Audi A3 Tie Rod Boot Part Number: 1K0-423-831-B
$20.34 MSRP: $32.54
You Save: $12.20 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cup; Boot, Tie Rod Boot
- Replaces: 1K0-423-831-A, 5C0-423-831
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1K0-423-831-B
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 2015 Audi A3 Submodels:
- Base, Premium, Premium Plus, Prestige, TDI, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS

2015 Audi A3 Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on the steering gear and track rod on 2015 Audi A3?
A: To change steering gear gaiters, clean, take off track rod end balljoint, unscrew locking nut, slide off gaiter, grease rack, install new gaiter without twisting, screw on, refit nut and balljoint as before. In the case of track rod replacement, take off gaiter, hold rack, loosen nut, change rod, tighten to spec, refit, check alignment.