What precautions should be taken when handling the driveshaft to prevent bending and ensure proper installation on 2006 Audi A4?

One should be careful not to bend the driveshaft too much, and it is a good idea to apply a holding device. Spare parts are not available and therefore when the components are worn out the whole assembly should be replaced. Start by lifting the vehicle, taking out the exhaust system and removing the driveshaft. Installation is in the reverse order.

Genuine 2006 Audi A4 Driveshaft

Drive Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Driveshafts found

View related parts
2006 Audi A4 Propeller Shaft Part Number: 8E0-521-101-AB
$1963.50 MSRP: $2357.15
You Save: $393.65 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Prop Shaft; Propeller Shaft
- Replaces: 8E0-521-101-P
- Item Weight: 27.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E0-521-101-AB
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 2006 Audi A4 Submodels:
- Base, Cabriolet | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
2006 Audi A4 Propeller Shaft Part Number: 8E0-521-101-T
$2022.99 MSRP: $2428.56
You Save: $405.57 (17%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Prop Shaft; Propeller Shaft
- Replaces: 8E0-521-101-D
- Item Weight: 25.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8E0-521-101-T
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 2006 Audi A4 Submodels:
- Base, Cabriolet | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS

2006 Audi A4 Driveshaft Parts and Q&A

Q: What precautions should be taken when handling the driveshaft to prevent bending and ensure proper installation on 2006 Audi A4?
A: One should be careful not to bend the driveshaft too much, and it is a good idea to apply a holding device. Spare parts are not available and therefore when the components are worn out the whole assembly should be replaced. Start by lifting the vehicle, taking out the exhaust system and removing the driveshaft. Installation is in the reverse order.