How to remove and refit the Windshield Wiper Motors assembly on 1992 Audi 100?

Removal of wiper motor assembly requires that the battery negative terminal be disconnected and the wiper arm removed. Take the nut off the motor spindle and unclips the trim panels and covers the light units. Disassemble the washer hose, washer wiring, motor bracket bolts and position the assembly. To refit, follow the same procedure, making sure that everything has been tightened.

Genuine 1992 Audi 100 Windshield Wiper Motors

Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Windshield Wiper Motors found

View related parts
1992 Audi 100 Rear Motor Part Number: 8A9-955-713
$254.18 MSRP: $356.00
You Save: $101.82 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor
- Position: Rear
- Item Weight: 2.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A9-955-713
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Front Motor Part Number: 4A1-955-113-C
$254.66 MSRP: $356.67
You Save: $102.01 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor; Front Motor
- Item Weight: 3.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A1-955-113-C
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS

1992 Audi 100 Windshield Wiper Motors Parts and Q&A

Q: How to remove and refit the Windshield Wiper Motors assembly on 1992 Audi 100?
A: Removal of wiper motor assembly requires that the battery negative terminal be disconnected and the wiper arm removed. Take the nut off the motor spindle and unclips the trim panels and covers the light units. Disassemble the washer hose, washer wiring, motor bracket bolts and position the assembly. To refit, follow the same procedure, making sure that everything has been tightened.