How to properly remove and refit Door Lock Switch, Mirror Switch, Power Seat Switch and Window Switch on 1992 Audi 100?

Making sure that the battery negative lead is disconnected before removing any switch. To eliminate steering column combination switches, loosen steering wheel and undo levers required. In several different models, dissolve switch assemblies and disconnect wiring connectors. The opposite is refitting so as to have safe connections. Repeat the procedure with other switches making sure that they have the right reconnections.

Genuine 1992 Audi 100 Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
1992 Audi 100 Lock Switch Part Number: 4A0-962-107-01C
$110.67 MSRP: $155.00
You Save: $44.33 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A0-962-107-01C
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS
View related parts
1992 Audi 100 Microswitch Part Number: 4A5-959-489-A
$42.83 MSRP: $59.00
You Save: $16.17 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch; Lock Switch
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4A5-959-489-A
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 100 Submodels:
- Base, CS, S | 6 Cyl 2.8 L GAS

1992 Audi 100 Door Lock Switch Parts and Q&A

Q: How to properly remove and refit Door Lock Switch, Mirror Switch, Power Seat Switch and Window Switch on 1992 Audi 100?
A: Making sure that the battery negative lead is disconnected before removing any switch. To eliminate steering column combination switches, loosen steering wheel and undo levers required. In several different models, dissolve switch assemblies and disconnect wiring connectors. The opposite is refitting so as to have safe connections. Repeat the procedure with other switches making sure that they have the right reconnections.