What Rack and Pinions components are required for refitting the steering column and how should the procedure be carried out on 1991 Audi 100?

Replace rack and pinions requiring new clamp/mount fasteners and sealing rings. Disconnect battery, raise and support car, remove wheels, secure discs, and detach servo, brake pipes, hoses, track rods, and servotronic wiring. Remove rack and pinions, inspect gaiter and assembly. Refit with new seals/fasteners, reassemble brakes, bleed systems, and check alignment.

Genuine 1991 Audi 100 Rack and Pinions

Steering Rack

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Rack and Pinions found

View related parts
1991 Audi 100 Gear Assembly Part Number: 443-422-065-LX
$1099.14 MSRP: $1421.00
You Save: $321.86 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering
- Replaces: 443-422-075, 443-422-075-X
- Item Weight: 23.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 443-422-065-LX
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1991 Audi 100 Submodels:
- Base, E | 5 Cyl 2.3 L GAS
View related parts
1991 Audi 100 Steering Gear Part Number: 8G1-422-065-X
$1066.00 MSRP: $1370.00
You Save: $304.00 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Steering
- Replaces: 8G1-422-065
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1-422-065-X
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1991 Audi 100 Submodels:
- Base, E | 5 Cyl 2.3 L GAS

1991 Audi 100 Rack and Pinions Parts and Q&A

Q: What Rack and Pinions components are required for refitting the steering column and how should the procedure be carried out on 1991 Audi 100?
A: Replace rack and pinions requiring new clamp/mount fasteners and sealing rings. Disconnect battery, raise and support car, remove wheels, secure discs, and detach servo, brake pipes, hoses, track rods, and servotronic wiring. Remove rack and pinions, inspect gaiter and assembly. Refit with new seals/fasteners, reassemble brakes, bleed systems, and check alignment.