The left seal mount, which may only be removed or attached with the convertible top removed, and the seal mount can only be installed with the left, center and right seal mounts which are installed with a dimension of 10 mm± 0.5 mm from the lower lip of the seal mount to the upper edge of the convertible top storage compartment. The seal mounts have adjacent edges which are sealed using sealant (part# AKD 512 000 05). Then adhesive tape is applied to the abutting edges from the lower side before applying the sealant. The seal mount is right, and 21 pop rivets and adhesive tape are also included. The seal of the tensioning strut can be removed or pressed on while the convertible top is half open.