How to remove and replace the Blower Motor and its components on Audi TT?

Remove the glove box and the screw clip retainer for the foam covering, then fold the foam covering away and off to the side. Next, remove the screws and cover. Disconnect the harness connector from the blower motor, then pull the blower motor carrier downwards and out of the housing. For the early version of the blower fan, remove the screw and slide the blower fan out of the carrier, noting that the carrier may have a sound insulation pad, with only the late version available for replacement. For the late version, depress the retainer clips and slide the blower fan out of the carrier. Install in reverse order of removal, ensuring that when re-installing the blower fan to the carrier, the mounting lugs are aligned and that the blower fan is properly seated in the housing.

Genuine Audi TT Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Blower Motors found

View related parts
Audi TT Adjust Motor Part Number: 1K1-907-511-C
$63.36 MSRP: $88.73
You Save: $25.37 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Audi TT | Base | 4 Cyl 2.0 L GAS
View related parts
Audi TT Adjust Motor Part Number: 1K1-907-511-E
$71.04 MSRP: $99.50
You Save: $28.46 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Audi TT | Base | 4 Cyl 2.0 L GAS
View related parts
Audi TT Adjust Motor Part Number: 1K1-907-511-G
$133.28 MSRP: $186.67
You Save: $53.39 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor
- Replaces: 1K1-907-511-D
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Audi TT | Base | 4 Cyl 2.0 L GAS
View related parts
Audi TT Adjust Motor Part Number: 1K0-907-511-B
$102.10 MSRP: $143.00
You Save: $40.90 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Audi TT | Base | 4 Cyl 2.0 L GAS
View related parts
Audi TT Adjust Motor Part Number: 8D2-820-511-C
$158.27 MSRP: $221.67
You Save: $63.40 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2000-2006 Audi TT | Base | 4 Cyl 1.8 L GAS
View related parts
Audi TT Adjust Motor Part Number: 1K0-907-511
Product Specifications
- Other Name: Motor
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Audi TT | Base | 4 Cyl 2.0 L GAS
View related parts
Audi TT Blower Motor Part Number: 1K1-820-015-Q
Product Specifications
- Other Name: Fan; Fan & Motor
- Replaces: 1K1-820-015-L, 1K1-820-015-G, 1K1-820-015-F, 1K1-820-015-P, 1K1-820-015-J
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2008-2009 Audi TT | Base | 4 Cyl 2.0 L GAS

Audi TT Blower Motor

The Audi TT Blower Motor powers the fan that sends heated or cooled air into the cabin. This allows the vehicle's occupants to regulate the temperature and clear the windows if fogged. Within the Audi HVAC assembly, the Blower Motor is integrated with the electrical system. It runs the fan blades when it receives electric power. This forces air to go through the heater core or evaporator and out the vents. The controls mounted inside the dashboard, which are accessible, vary the airflow volume. These controls are connected through wiring to an electronic Blower Motor control module. The module varies the current delivered to the motor and so varies the Blower Motor speed. When the driver turns the dial or presses the switch, the module adjusts the motor speed so that air can be sent through the system at slow, medium, or fast levels. When the electronic board of the module fails, when the wiring is no longer continuous, and when the physical switches are broken, the motor may lose all variable control. This leaves the climate system at one speed or completely off. As a result, the component depends on intact wiring, effective controls, and a healthy module to be responsive. Audi's ergonomic designs aim to provide comfort features that can be adjusted immediately, either by enhancing warmth during the cold start of the day or reducing the heat after its same exposure to the sun. The single motor would fit the compact interior found on the Audi TT, even though other bigger vehicles don't use multiples. Consistent check-up of the module, switches, and wiring keeps the Blower Motor supplying reliable airflow for trusted Audi climate comfort.

Choose original equipment manufacturer Blower Motor for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Blower Motor at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi TT and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your TT needs now.

Audi TT Blower Motor Parts and Q&A

Adjust Motor
8D2-820-511-C
Q:
How to remove and replace the Blower Motor and its components on Audi TT?
A:
Remove the glove box and the screw clip retainer for the foam covering, then fold the foam covering away and off to the side. Next, remove the screws and cover. Disconnect the harness connector from the blower motor, then pull the blower motor carrier downwards and out of the housing. For the early version of the blower fan, remove the screw and slide the blower fan out of the carrier, noting that the carrier may have a sound insulation pad, with only the late version available for replacement. For the late version, depress the retainer clips and slide the blower fan out of the carrier. Install in reverse order of removal, ensuring that when re-installing the blower fan to the carrier, the mounting lugs are aligned and that the blower fan is properly seated in the housing.