Upper A-pillar trim, screws (2x), clips (4x), flap for roof grab handle, roof grab handle, mounts, groove, seal, pin, and mount are involved in the process. Pivot down the flap on the roof grab handle at the groove. Remove the screws, unclip the A-pillar trim starting at the top, pull out the trim, and rotate it upward. For models with hands-free telephone function, disconnect the connector for the hands-free unit. The installation is the reverse of removal, ensuring to carefully route the wiring and connector for the hands-free telephone unit from bottom to top if equipped, move the sun visor out of the way, insert the trim with clips in the mounts, insert the pin in the mount, clip in the trim, and install the door seal over the A-pillar trim.