How to remove and install front and rear bumpers on Audi A4?

Front and rear bumpers are made of fascia or bumper cover and metal structural beam. In order to lift the front bumper cover, lift the vehicle, and hold it steady with jackstands, lift the splash shield underneath the engine. To remove the upper mounting fasteners, loosen the hood, remove the front part of the inner fender splash shield and pull it back. On both front wheelwells, loosen the fasteners attaching the bumper cover to both fenderwalls and un clip the rear end of the cover. Take the retaining tab at the bottom in the front side with the screwdriver in order to remove the lower grilles on both sides. In case of fog lights, they should be removed and the ambient temperature sensor disconnected should it have one. From underneath, unscrew two retaining bumper bolts, and push the bumper assembly out of the car, disconnecting any headlight washer hoses in the process. In case the bumper cover should be detached off the metal bumper, loosen catches and fasteners. To install, undo all the steps of removal, making sure that all fasteners are loose fitting before tightening. In the case of the rear bumper cover, the first step is to remove the fasteners that hold the liner together at the bottom of the rear. Fold up the wheelwell liner and undo the fasteners that are holding the bumper cover. Fold the floor covering aside in the trunk area, remove the side storage compartment and navigation tuner (where fitted) and remove the mounting nuts and support bracket bolts. On Avant models, the floor sill plate, and side trim panels are removable to gain access to the support bracket bolts. The bumper cover assembly should be carefully pulled out of the back of the car, one locking tab at a time. The fasteners can be removed to take out the bumper support brackets. To install, undo all the steps of removal, making sure that all fasteners are loose fitting before tightening.

Genuine Audi A4 Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

27 Bumpers found

View related parts
Audi A4 Bumper Cover Part Number: 8E5-807-301-L-GRU
$527.17 MSRP: $738.33
You Save: $211.16 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2002-2005 Audi A4 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E5-807-301-AF-GRU
$553.35 MSRP: $775.00
You Save: $221.65 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2004-2005 Audi A4 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E5-807-301-M-GRU
$556.92 MSRP: $780.00
You Save: $223.08 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2002-2005 Audi A4 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E5-807-301-AE-GRU
$596.19 MSRP: $835.00
You Save: $238.81 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2004-2005 Audi A4 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E0-807-103-M-GRU
$619.99 MSRP: $868.34
You Save: $248.35 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2002-2003 Audi A4 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8D5-807-303-B-GRU
$640.22 MSRP: $896.67
You Save: $256.45 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1996-2001 Audi A4 | Avant, Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E0-807-103-T-GRU
$653.31 MSRP: $915.00
You Save: $261.69 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2004-2005 Audi A4 | Base | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8D0-807-103-S-GRU
$702.10 MSRP: $983.34
You Save: $281.24 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Replaces: 8D0-807-103-D-GRU
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1996-2001 Audi A4 | Avant, Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8K5-807-303-A-GRU
$816.34 MSRP: $1143.33
You Save: $326.99 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2012 Audi A4 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8K5-807-303-GRU
$838.95 MSRP: $1175.00
You Save: $336.05 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2012 Audi A4 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8K5-807-067-GRU
$930.58 MSRP: $1303.33
You Save: $372.75 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2013-2016 Audi A4 | Base, Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8K5-807-067-A-GRU
$929.39 MSRP: $1301.68
You Save: $372.29 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2013-2016 Audi A4 | Base, Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8K5-807-303-B-GRU
$885.36 MSRP: $1240.00
You Save: $354.64 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2012 Audi A4 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8K5-807-303-C-GRU
$893.69 MSRP: $1251.67
You Save: $357.98 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2012 Audi A4 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8H0-807-105-D-GRU
$953.19 MSRP: $1334.99
You Save: $381.80 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2003-2006 Audi A4 | Cabriolet | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8H0-807-303-E-GRU
$834.19 MSRP: $1168.33
You Save: $334.14 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2003-2006 Audi A4 | Cabriolet | 4 Cyl 1.8 L GAS, 6 Cyl 3.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8H0-807-303-GRU
$954.38 MSRP: $1336.66
You Save: $382.28 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2007-2009 Audi A4 | Cabriolet | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E5-807-303-B-GRU
$960.33 MSRP: $1345.01
You Save: $384.68 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2005-2008 Audi A4 | Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8W5-807-067-GRU
$1005.55 MSRP: $1408.34
You Save: $402.79 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2017 Audi A4 | Premium | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Bumper Cover Part Number: 8E5-807-303-C-GRU
$917.49 MSRP: $1285.00
You Save: $367.51 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2005-2008 Audi A4 | Base | 4 Cyl 2.0 L GAS, 6 Cyl 3.2 L GAS

| Page 1 of 2 |Next >

1-20 of 27 Results

Audi A4 Bumper

The Audi A4 Bumper serves as a frontline defense for the sedan, absorbing the impact energy of minor crashes and sending it in a different direction, affecting the occupants and body parts as little as possible. The Bumper itself, on each Audi, is located at the nose and tail and has an outer shell of plastic that conceals either foam or honeycomb structures, which collapse when impacted to divert forces away from vulnerable components such as the hood, fenders, trunk lid, and exhaust. Since the majority of states require front and rear guards as dictated by law, fines can be imposed when driving any Audi without a guard. The A4 has provided unique Bumper constructions over the years, which have a similar mission in terms of safety but need to suit different needs, making Audi fans have a choice of looks and toughness. Aluminum alloy variants are suitable for performance-oriented owners who need to consider the ability to resist rust and have easy handling; carbon steel variants provide the addition of muscle to be applied in harsher environments at the expense of added weight and potential rust at a higher cost; and stainless steel is in between, offering the same strength as carbon steel but with better resistance to rust. Others are a mixture of metal and plastic, striking a balance between price and usability, and most of them come in chrome-plated, painted, primed, or textured finishes to allow the Audi driver to keep the factory paint or paint their own. Irrespective of style, the selection of a good-quality Bumper protects the cabin, maintains the appearance of the vehicle, and safeguards the passengers in case of low-speed collisions.

Choose original equipment manufacturer Bumper for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Bumper at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi A4 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your A4 needs now.

Audi A4 Bumper Parts and Q&A

Bumper Cover
8E0-807-103-M-GRU
Q: How to remove and install front and rear bumpers on Audi A4?
A:
Front and rear bumpers are made of fascia or bumper cover and metal structural beam. In order to lift the front bumper cover, lift the vehicle, and hold it steady with jackstands, lift the splash shield underneath the engine. To remove the upper mounting fasteners, loosen the hood, remove the front part of the inner fender splash shield and pull it back. On both front wheelwells, loosen the fasteners attaching the bumper cover to both fenderwalls and un clip the rear end of the cover. Take the retaining tab at the bottom in the front side with the screwdriver in order to remove the lower grilles on both sides. In case of fog lights, they should be removed and the ambient temperature sensor disconnected should it have one. From underneath, unscrew two retaining bumper bolts, and push the bumper assembly out of the car, disconnecting any headlight washer hoses in the process. In case the bumper cover should be detached off the metal bumper, loosen catches and fasteners. To install, undo all the steps of removal, making sure that all fasteners are loose fitting before tightening. In the case of the rear bumper cover, the first step is to remove the fasteners that hold the liner together at the bottom of the rear. Fold up the wheelwell liner and undo the fasteners that are holding the bumper cover. Fold the floor covering aside in the trunk area, remove the side storage compartment and navigation tuner (where fitted) and remove the mounting nuts and support bracket bolts. On Avant models, the floor sill plate, and side trim panels are removable to gain access to the support bracket bolts. The bumper cover assembly should be carefully pulled out of the back of the car, one locking tab at a time. The fasteners can be removed to take out the bumper support brackets. To install, undo all the steps of removal, making sure that all fasteners are loose fitting before tightening.