How to disconnect and refit the Brake Light Switches on the pedal bracket on Audi 90?

Working inside the car, disconnect the wiring from the stop-light switch on the pedal bracket. Pull the switch from the special clip, and if necessary, remove the shim and the special clip. Refitting is a reversal of removal, but adjust the switch by depressing the brake pedal and holding it down, then fully pressing in the switch through the special clip. Finally, pull up the brake pedal to its stop by hand.

Genuine Audi 90 Brake Light Switches

Stop Light Switches

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switches found

View related parts
Audi 90 Parking Brake Warning Switch Part Number: 443-947-563
$20.00 MSRP: $32.00
You Save: $12.00 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1995 Audi 90 | Base, Sport | 6 Cyl 2.8 L GAS

Audi 90 Brake Light Switches

Choose original equipment manufacturer Brake Light Switches for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Brake Light Switches at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi 90 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your 90 needs now.

Audi 90 Brake Light Switches Parts and Q&A

Parking Brake Warning Switch
443-947-563
Q: How to disconnect and refit the Brake Light Switches on the pedal bracket on Audi 90?
A:
Working inside the car, disconnect the wiring from the stop-light switch on the pedal bracket. Pull the switch from the special clip, and if necessary, remove the shim and the special clip. Refitting is a reversal of removal, but adjust the switch by depressing the brake pedal and holding it down, then fully pressing in the switch through the special clip. Finally, pull up the brake pedal to its stop by hand.