How to properly remove and refit the sway bar on Audi 80?

Use the handbrake, then put the axle which is in front of the car on axle supports followed by the removal of the front wheels. Reattach the front mounting clamps by unscrewing the bolts to remove them, but be careful as some models could have a stud and nut in place of the lower bolt. Unscrew the nut or bolts which hold the side mountings in place with the lower suspension arms, and pull out the sway bar underneath the car. Take back the mounting rubbers, washers, and spacers, be careful to note their locations. On power steering models, unscrew the nuts, and reclaim the mounting rubbers, washers, and spacers. Check the mounting rubbers: whether they are in a bad state or damaged, change them. Refitting When refitting, repeat the taking away process and make sure that the sway bar is fitted back in its correct sense with the offset away on the lower arm of the suspension and do not fully tighten the sway bar mountings till the entire weight of the car is on the wheels.

Genuine Audi 80 Sway Bar

Sway Bar Kit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Sway Bars found

View related parts
Audi 80 Stabilizer Bar Part Number: 855-411-309-A
$89.68 MSRP: $125.60
You Save: $35.92 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1988-1989 Audi 80 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi 80 Stabilizer Bar Part Number: 893-411-309-B
$99.67 MSRP: $139.60
You Save: $39.93 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1988-1990 Audi 80 | Base | 4 Cyl 2.0 L GAS
View related parts
Audi 80 Stabilizer Bar Part Number: 893-511-409-H
$117.81 MSRP: $165.00
You Save: $47.19 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1990-1992 Audi 80 | Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS
View related parts
Audi 80 Stabilizer Bar Part Number: 893-411-309-F
$128.52 MSRP: $180.00
You Save: $51.48 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1988-1992 Audi 80 | Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS
View related parts
Audi 80 Stabilizer Bar Part Number: 893-411-309-C
$167.67 MSRP: $234.83
You Save: $67.16 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stabilizer
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1988-1990 Audi 80 | Base | 4 Cyl 2.0 L GAS

Audi 80 Sway Bar

Choose original equipment manufacturer Sway Bar for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Sway Bar at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi 80 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your 80 needs now.

Audi 80 Sway Bar Parts and Q&A

Stabilizer Bar
855-411-309-A
Q: How to properly remove and refit the sway bar on Audi 80?
A:
Use the handbrake, then put the axle which is in front of the car on axle supports followed by the removal of the front wheels. Reattach the front mounting clamps by unscrewing the bolts to remove them, but be careful as some models could have a stud and nut in place of the lower bolt. Unscrew the nut or bolts which hold the side mountings in place with the lower suspension arms, and pull out the sway bar underneath the car. Take back the mounting rubbers, washers, and spacers, be careful to note their locations. On power steering models, unscrew the nuts, and reclaim the mounting rubbers, washers, and spacers. Check the mounting rubbers: whether they are in a bad state or damaged, change them. Refitting When refitting, repeat the taking away process and make sure that the sway bar is fitted back in its correct sense with the offset away on the lower arm of the suspension and do not fully tighten the sway bar mountings till the entire weight of the car is on the wheels.