How to remove and refit the blower motor and mounting plate from underneath the glovebox on Audi 80?

Take out the bolts under the glovebox and remove it and remove the wiring. The second step is to unscrew the bolts of the mounting plate and take out the blower unit and the mounting plate. In case of necessity, remove the mounting plate of the unit. Refitting To be able to refit, the removal process should be reversed, but before this is done, the mounting areas should be coated with a silicone rubber solution.

Genuine Audi 80 Blower Motor

A/C Heater Blower Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor found

View related parts
Audi 80 Fan & Motor Part Number: 701-819-021-B
Product Specifications
- Other Name: Fan; Fan & Motor
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1988-1992 Audi 80 | Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS

Audi 80 Blower Motor

Choose original equipment manufacturer Blower Motor for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Blower Motor at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi 80 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your 80 needs now.

Audi 80 Blower Motor Parts and Q&A

Fan & Motor
701-819-021-B
Q: How to remove and refit the blower motor and mounting plate from underneath the glovebox on Audi 80?
A:
Take out the bolts under the glovebox and remove it and remove the wiring. The second step is to unscrew the bolts of the mounting plate and take out the blower unit and the mounting plate. In case of necessity, remove the mounting plate of the unit. Refitting To be able to refit, the removal process should be reversed, but before this is done, the mounting areas should be coated with a silicone rubber solution.