Genuine 2006 Audi A3 Driveshaft

2006 Audi A3 Driveshaft Parts and Q&A

• Q: How should driveshaft joints be checked and diagnosed for wear on 2006 Audi A3?

  A: If any of the checks reveal wear in any driveshaft joint, first remove the roadwheel trim or centre cap as applicable and check that the hub bolt is tight. If the bolt is loose, obtain a new one and tighten it to the specified torque. If the bolt is tight, refit the centre cap or trim and repeat the check on the other hub bolt. Road test the vehicle and listen for a metallic clicking from the front as the vehicle is driven slowly in a circle on full-lock. If a clicking noise is heard, this indicates wear in the outer constant velocity joint, meaning that the joint must be renewed. If vibration consistent with road speed is felt through the car when accelerating, there is a possibility of wear in the inner constant velocity joints. To check the joints for wear, remove the driveshafts and then dismantle them. If any wear or free play is found, the affected joint must be renewed. For information on the availability of driveshaft components, consult an Audi dealer.