How to properly replace the control arm and balljoint on 1995 Audi 90?

Apply the handbrake, jack the front, support stands, remove the wheel. For manual steering remove the anti-roll bar; for power steering undo the side link. Release balljoint, remove pivot bolts, withdraw arm. Inspect and renew balljoint/bushes as needed. Refit in reverse, torque and angle-tighten fasteners, renew self-locking nuts, check camber.

Genuine 1995 Audi 90 Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Control Arms found

View related parts
1995 Audi 90 Lower Control Arm Part Number: 893-407-147-D
$386.13 MSRP: $540.80
You Save: $154.67 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Arm
- Position: Left
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 893-407-147-D
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1995 Audi 90 Submodels:
- Base, CS, S, Sport | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
View related parts
1995 Audi 90 Lower Control Arm Part Number: 893-407-148-D
$386.13 MSRP: $540.80
You Save: $154.67 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Arm
- Position: Right
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 893-407-148-D
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1995 Audi 90 Submodels:
- Base, CS, S, Sport | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS

1995 Audi 90 Control Arm Parts and Q&A

Q: How to properly replace the control arm and balljoint on 1995 Audi 90?
A: Apply the handbrake, jack the front, support stands, remove the wheel. For manual steering remove the anti-roll bar; for power steering undo the side link. Release balljoint, remove pivot bolts, withdraw arm. Inspect and renew balljoint/bushes as needed. Refit in reverse, torque and angle-tighten fasteners, renew self-locking nuts, check camber.