How to renew the flywheel on 1988 Audi 90?

The procedure involves marking the flywheel/driveplate in relation to the crankshaft, as the retaining bolt holes are not offset. When renewing the flywheel on the 20-valve engine, two new ignition timing point pins must be fitted, and the ignition and engine speed senders should be adjusted using a feeler gauge.

Genuine 1988 Audi 90 Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Flywheels found

View related parts
1988 Audi 90 Drive Plate Part Number: 053-105-323-G
$202.78 MSRP: $284.00
You Save: $81.22 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Driv.Disc
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 053-105-323-G
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1988 Audi 90 Submodels:
- Base | 4 Cyl 2.0 L GAS
View related parts
1988 Audi 90 Flywheel Part Number: 026-105-269-L
$404.59 MSRP: $566.65
You Save: $162.06 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Item Weight: 21.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 026-105-269-L
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1988 Audi 90 Submodels:
- Base | 4 Cyl 2.0 L GAS
View related parts
1988 Audi 90 Flywheel Part Number: 034-105-270-E
$428.40 MSRP: $600.00
You Save: $171.60 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 034-105-270-E
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1988 Audi 90 Submodels:
- Base | 5 Cyl 2.3 L GAS

1988 Audi 90 Flywheel Parts and Q&A

Q: How to renew the flywheel on 1988 Audi 90?
A: The procedure involves marking the flywheel/driveplate in relation to the crankshaft, as the retaining bolt holes are not offset. When renewing the flywheel on the 20-valve engine, two new ignition timing point pins must be fitted, and the ignition and engine speed senders should be adjusted using a feeler gauge.