How should the alternator drive belt be checked and renewed every 15,000 km (10,000 miles) on 1987 Audi 4000?

The alternator drivebelt is to be checked and re-tensioned every 15,000km. In case they show any damage, then it must be changed. In order to remove it, loosen the adjustment nuts and twist the alternator. Install the new drivebelt, tighten, and screw the bolts. Lastly, start the engine and recheck the tension.

Genuine 1987 Audi 4000 Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Drive Belts found

View related parts
1987 Audi 4000 Alternator Belt Part Number: 050-903-137
$20.84 MSRP: $27.79
You Save: $6.95 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: V-Belt
- Replaces: 050-903-137-SBV, 026-903-137-C, 049-903-137-B
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 050-903-137
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1987 Audi 4000 Submodels:
- S | 4 Cyl 1.8 L GAS
View related parts
1987 Audi 4000 Power Steering Belt Part Number: 068-145-271-C
$11.07 MSRP: $14.42
You Save: $3.35 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: V-Belt; Power Steering Belt
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 068-145-271-C
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1987 Audi 4000 Submodels:
- S | 4 Cyl 1.8 L GAS

1987 Audi 4000 Drive Belt Parts and Q&A

Q: How should the alternator drive belt be checked and renewed every 15,000 km (10,000 miles) on 1987 Audi 4000?
A: The alternator drivebelt is to be checked and re-tensioned every 15,000km. In case they show any damage, then it must be changed. In order to remove it, loosen the adjustment nuts and twist the alternator. Install the new drivebelt, tighten, and screw the bolts. Lastly, start the engine and recheck the tension.