How to properly remove and replace the rear sway bar and sway bar bushing on Audi A4?

Unscrew the wheel bolts at the back of the vehicle, lift the back of the vehicle and position it safely on jackstands and block the front wheels to ensure that it does not roll. Installation Uninstall the rear wheels and the lower control arm stone trim protector (where applicable). Once more, remove the mounting fasteners of the stabilizer bar links and loosen the links of the bar making sure to take the stabilizer lower mounting fasteners off first then the upper fastening. In the convertible models, also pull off the rear cross brace bolts as well as the brace. Then, loosen the stabilizer bar clamp mounting fasteners and remove the stabilizer bar, where in models with two rear mufflers, some of the rear of the exhaust system could have to be disassembled in order to access the stabilizer bar. Check the stabilizer bar bushings and link bushings, checking on cracks, tears or deterioration and replace as needed and assess the end of the links ballstuds, by checking on loose ones and replacing the links, where necessary. Installation is done in the opposite sequence of removing and lastly, tighten the wheel bolts to the right torque value.

Genuine Audi A4 Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Sway Bar Bushings found

View related parts
Audi A4 Stabilizer Bar Bushing Part Number: 8E0-511-327-A
$16.24 MSRP: $25.98
You Save: $9.74 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2002-2009 Audi A4 | Base, Cabriolet | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi A4 Stabilizer Bar Bushing Part Number: 4D0-411-327-G
$13.61 MSRP: $21.78
You Save: $8.17 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2020 Audi A4 | Base, Premium, Premium Plus, Prestige, Titanium | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Stabilizer Bar Mount Bushing Part Number: 4D0-411-327-H
$13.61 MSRP: $21.77
You Save: $8.16 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 1996-2001 Audi A4 | Avant, Base | 4 Cyl 1.8 L GAS, 6 Cyl 2.8 L GAS
View related parts
Audi A4 Stabilizer Bar Bushing Part Number: 8K0-411-327-A
$15.24 MSRP: $24.39
You Save: $9.15 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2009-2016 Audi A4 | Base, Premium, Premium Plus, Prestige | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Stabilizer Bar Bushing Part Number: 8K0-411-327-B
$15.18 MSRP: $24.29
You Save: $9.11 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing, Isolator
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2017-2020 Audi A4 | Premium, Premium Plus, Prestige, Titanium | 4 Cyl 2.0 L GAS
View related parts
Audi A4 Stabilizer Bar Bushing Part Number: 4D0-411-327-J
$15.74 MSRP: $25.18
You Save: $9.44 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing, Isolator, Stabilizer Bar Bushing
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2002-2009 Audi A4 | Base, Cabriolet | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS
View related parts
Audi A4 Stabilizer Bar Bushing Part Number: 4B0-511-327
$11.34 MSRP: $17.71
You Save: $6.37 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Mounting; Bushing
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following Vehicles:
- 2002-2008 Audi A4 | Base | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS

Audi A4 Sway Bar Bushing

Choose original equipment manufacturer Sway Bar Bushing for great performance and strong durability. They use Audi's official craftsmanship and high-grade materials, and meet strict quality standards. Are you looking for quality Sway Bar Bushing at a good price? Come to our online store. We carry a wide range of genuine parts for your Audi A4 and the prices are competitive. Each part comes with the manufacturer's warranty. You can install with confidence and get steady results. Over time, you'll save money and avoid hassle. Keep your maintenance simple and protect your vehicle with OEM parts. Get the quality your A4 needs now.

Audi A4 Sway Bar Bushing Parts and Q&A

Stabilizer Bar Bushing
4B0-511-327
Q: How to properly remove and replace the rear sway bar and sway bar bushing on Audi A4?
A:
Unscrew the wheel bolts at the back of the vehicle, lift the back of the vehicle and position it safely on jackstands and block the front wheels to ensure that it does not roll. Installation Uninstall the rear wheels and the lower control arm stone trim protector (where applicable). Once more, remove the mounting fasteners of the stabilizer bar links and loosen the links of the bar making sure to take the stabilizer lower mounting fasteners off first then the upper fastening. In the convertible models, also pull off the rear cross brace bolts as well as the brace. Then, loosen the stabilizer bar clamp mounting fasteners and remove the stabilizer bar, where in models with two rear mufflers, some of the rear of the exhaust system could have to be disassembled in order to access the stabilizer bar. Check the stabilizer bar bushings and link bushings, checking on cracks, tears or deterioration and replace as needed and assess the end of the links ballstuds, by checking on loose ones and replacing the links, where necessary. Installation is done in the opposite sequence of removing and lastly, tighten the wheel bolts to the right torque value.