Q: Where is the Oil Pressure Switch located and How to remove and refit it on 2015 Audi A3?
A: The oil pressure warning light switch is at the left hand end of the cylinder head. In order to eliminate it, disconnect the wiring connector and clean the space around the switch. Unscrew the switch off the cylinder head and remove it together with its sealing washer; in the event the switch will remain removed over a long period of time, plug the cylinder head aperture. Prior to refitting, check the sealing washer and determine whether it has been damaged or deteriorated and change accordingly. Install the washer in the switch and secure it to the required tightness. Lastly, properly re-connect the wiring connector and ensure the level of engine oil is satisfactory, refilling it where needed.