Warranty: This genuine part is guaranteed by Audi's
factory warranty.
Fits the following 2015 Audi A3 Submodels:
Premium, Premium Plus, Prestige, TDI Premium, TDI Premium Plus, TDI Prestige, Titanium | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L DIESEL, 4 Cyl 2.0 L GAS
2015 Audi A3 Brake Pad Set Parts and Q&A
Q: How can the outer Brake Pad Set be checked without removing the wheels for Diesel engines on 2015 Audi A3?
A: The outer brake pads can be checked without removing the wheels by observing them through the holes in the wheels, and if necessary, the wheel trim can be removed. The thickness of the pad lining must not be less than the specified dimension. If the outer pads are worn near their limits, it is advisable to check the inner pads as well; this involves applying the handbrake, jacking up the vehicle, and supporting it on axle stands before removing the roadwheels. A steel rule can be used to measure the thickness of the brake pads and compare it with the minimum thickness specified. For a thorough inspection, the brake pads should be removed and cleaned, allowing for the caliper's operation to be checked and the condition of the brake disc to be examined on both sides. If any pad's friction material is worn to the specified minimum thickness or less, all four pads at the front or rear must be replaced as a set. Upon completing the check, the roadwheels should be refitted, and the vehicle lowered to the ground.