How to replace the Rack and Pinion Boot on the steering rack on 1995 Audi 90?

Unscrew and remove the bolts securing the tie-rod carrier plate to the steering rack, then support the plate above the rack. Remove the rack and pinion boot from the steering gear housing and scoop any remaining grease from inside. Fit the new rack and pinion boot, tighten the clip, and reattach the tie-rod carrier plate.

Genuine 1995 Audi 90 Rack and Pinion Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Rack and Pinion Boot found

View related parts
1995 Audi 90 Tie Rod Boot Part Number: 811-419-831-B
$21.75 MSRP: $34.80
You Save: $13.05 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 811-419-831-B
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1995 Audi 90 Submodels:
- Base, CS, S, Sport | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS

1995 Audi 90 Rack and Pinion Boot Parts and Q&A

Q: How to replace the Rack and Pinion Boot on the steering rack on 1995 Audi 90?
A: Unscrew and remove the bolts securing the tie-rod carrier plate to the steering rack, then support the plate above the rack. Remove the rack and pinion boot from the steering gear housing and scoop any remaining grease from inside. Fit the new rack and pinion boot, tighten the clip, and reattach the tie-rod carrier plate.