How to remove and refit the horns on 1995 Audi 90?

Apply the handbrake, jack up the front of the car, and support it on axle stands. Remove the splash guard. Disconnect the wiring from the horn(s) located under the left front corner, then unbolt them. Refitting is the reverse of removal; check for correct operation afterward.

Genuine 1995 Audi 90 Horn

Alarm Horn

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Horns found

View related parts
1995 Audi 90 Horn Part Number: 171-951-221
$97.82 MSRP: $137.00
You Save: $39.18 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 171-951-221-SBV
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 171-951-221
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1995 Audi 90 Submodels:
- Base, CS, S, Sport | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS
View related parts
1995 Audi 90 Lower Note Horn Part Number: 8W0-951-221
$151.07 MSRP: $211.58
You Save: $60.51 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Horn; Lower Note Horn
- Position: Right
- Replaces: 3B0-951-221, 191-951-221
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W0-951-221
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1995 Audi 90 Submodels:
- Base, Sport | 6 Cyl 2.8 L GAS
View related parts
1995 Audi 90 Horn Part Number: 8D0-951-223
$149.44 MSRP: $209.30
You Save: $59.86 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8D0-951-223
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1995 Audi 90 Submodels:
- Base, Sport | 6 Cyl 2.8 L GAS

1995 Audi 90 Horn Parts and Q&A

Q: How to remove and refit the horns on 1995 Audi 90?
A: Apply the handbrake, jack up the front of the car, and support it on axle stands. Remove the splash guard. Disconnect the wiring from the horn(s) located under the left front corner, then unbolt them. Refitting is the reverse of removal; check for correct operation afterward.