How to replace the shock absorbers and coil springs on 1992 Audi 80?

Open boot, remove spare and trim. Remove cap, chock fronts. Jack and support rear/axle. Undo top nut; avoid removing both shocks. Lower axle, undo lower bolt, remove shock, spring, and rubbers, noting positions. Clean, inspect, match colour codes, prime shock. Refit in reverse; talc rubbers, tighten under load, renew nuts.

Genuine 1992 Audi 80 Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
1992 Audi 80 Shock Absorber Part Number: 893-513-031-AG
$101.39 MSRP: $142.00
You Save: $40.61 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorb
- Replaces: 893-513-031-P
- Item Weight: 5.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 893-513-031-AG
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
More Info
Fits the following 1992 Audi 80 Submodels:
- Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS
View related parts
1992 Audi 80 Strut Cartridge Part Number: 8G0-413-503-B
$278.46 MSRP: $390.00
You Save: $111.54 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorb; Shock, Strut, Strut Cartridge
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G0-413-503-B
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 80 Submodels:
- Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS
View related parts
1992 Audi 80 Shock Absorber Part Number: 893-513-031-AD
$285.36 MSRP: $399.67
You Save: $114.31 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorb
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 893-513-031-AD
- Warranty: This genuine part is guaranteed by Audi's factory warranty.
Fits the following 1992 Audi 80 Submodels:
- Base | 4 Cyl 2.0 L GAS, 5 Cyl 2.3 L GAS

1992 Audi 80 Shock Absorber Parts and Q&A

Q: How to replace the shock absorbers and coil springs on 1992 Audi 80?
A: Open boot, remove spare and trim. Remove cap, chock fronts. Jack and support rear/axle. Undo top nut; avoid removing both shocks. Lower axle, undo lower bolt, remove shock, spring, and rubbers, noting positions. Clean, inspect, match colour codes, prime shock. Refit in reverse; talc rubbers, tighten under load, renew nuts.